数控手工编程100例 第二版
作 者： 陈艳红 编
出版时间： 2014
丛编项： 数控编程100例丛书
内容简介
本书以国内外主流的FANUC系统、SIEMENS系统为平台，以典型零件的数控编程与加工为主线，精选100个实例，由浅入深、循序渐进地介绍数控机床手工编程的方法与技巧，语言简洁，层次清晰。全书共分三篇8章，第1篇（第1～3章）介绍数控车床编程基础知识与编程实例，第2篇（第4～6章）介绍数控铣床（加工中心）编程基础知识与编程实例，第3篇（第7、8章）介绍数控电火花线切割机床编程基础知识与编程实例。本书可作为生产一线从事数控机床应用的工程技术人员的参考用书和继续教育书籍，也可作为高等院校、高职高专、中职中专相关专业的实训教材。
目录
第2版前言 第1 篇 数控车床编程实例·····························1
第1 章 数控车床编程基础·····························2
1.1 数控车床概述············································2
1.1.1
数控车床的功能及特点······················2
1.1.2 数控车床的分类··································3
1.2 数控车削加工工艺基本知识····················5
1.2.1 数控车床的工件装夹··························5
1.2.2 数控车床的刀具··································6
1.2.3 数控车削加工工艺的制订················10
1.2.4 数控车床切削用量的选择················14
1.3 数控车床的编程要点······························16
1.3.1 数控车床的编程特点及坐标系········16
1.3.2 对刀及设置工件原点的方法············17
1.3.3 刀具补偿及参数的设定····················19
第2 章 FANUC 数控车床编程实例···············23
2.1 阶梯轴类零件编程加工（4 例）···········23
2.1.1
实例1——阶梯轴类零件编程加工（一）································23
2.1.2
实例2——阶梯轴类零件编程加工（二）································25
2.1.3
实例3——阶梯轴类零件编程加工（三）································27
2.1.4
实例4——阶梯轴类零件编程加工（四）································29
2.2
成形面类零件编程加工（2 例）···········31
2.2.1
实例5——成形面类零件编程加工（一）································31
2.2.2
